Tips for Increasing Vapor Production from Your MOD

Having an increased amount of vapor is the sure way to get the most out of your vaping experience. To achieve this, your battery must be able to put out the required power safely and the only way it can do that is by using sub-ohms. Batteries also can only provide a safe amount of current. This is referred to as the amp limit. So, make sure that you are aware that if you intend to utilize a MOD that requires its own battery, ensure that its battery's amp limit is continuous.

For those of you who have a more regulated and modern MOD that comes with a battery built-in, then you can enjoy all the vape you want without worrying. With that said, here are a few tips for increasing vapor production from your MOD.

Higher Power = Higher Vapor Amount

When using a basic device, the user must be aware that the only type of atomizer they can use is one with higher resistance that sends a fixed voltage. Although this will allow an increased amount of vapor through your technique of pulling, there is nothing else that you will be able to do to improve it. On the other hand, there are many other devices that do have the capabilities to increase the amount of vapor.

Besides that, the minimum you should pay for a VV/VW MOD is $50 to achieve maximum vapor. But if you want to spend a little more, you will experience a vaping session like no other.

Purchase the Best Atomizer Possible

We cannot stress enough of how important your atomizer has to be for the production of vapor. Therefore, most vapers stick to the sub-ohm atomizer tanks because of their coils being low resistance; so, they can tolerate the increased power that the coil requires. The use of sub-ohm tanks will be your best bet.

The type of atomizer that you want to stay away from is the clearomizer. This is because you won't receive the desired amount of vapor that you are looking for. What it all boils down to is the fact that having an atomizer that is higher than CE5 is ideal for blowing the most clouds.

Keep Your Wattage High

Keeping your wattage high will produce a higher amount of vapor. This is because if you have a higher amount of electricity flowing through the coil, you will have a higher amount of liquid that gets vaporized, causing a higher amount of vapor to be produced.

You must be careful though or you will easily destroy the coils. To prevent any damage to your coils, start out on a low setting and increase it gradually until you reach a comfortable setting.

The reasoning behind the use of wattage versus voltage is because wattage is more widely used. Wattage also considers the amount of coil resistance and makes proper adjustments. This is good to know because if your voltage is the same for two coils, the performance will be different if the resistance is also different, but your wattage will give the same performance though.

Airflow Is Key

It is guaranteed that the more airflow you have, the more vapor you will create. If you have very low airflow, but are still able to obtain a lot of vapor, then you are likely running hot with a high amount of concentrate. This could create a very unpleasant experience. If you simply increase the airflow, you will instantly get more vapor as well as cool vapor, too. More importantly, you want your vape to be cool if you intend to use a higher wattage.

The point is to create a balance and finding your comfort zone. To find the balance you might want, to begin with, a warmer vapor created with a completely open airflow may not be a good choice. This could cause your cloud to appear weak. It could also cause the flavor to be reduced tremendously, but if you are not in it for the taste, then keeping your airflow wide open won't matter to you.

If anything else, while vaping it is important that you at least have an adjustable airflow setting for your atomizer. Today, many of the atomizers available have these settings, so being able to create a lot of vapor will no longer be a problem.

Build the Best Dominant E-Cig Kit to Fit Your Tastes Without A Big Waste

Newbie vapers with serious desire to extract full benefit from e-cigarettes must have a basic grasp of various tasks required to build the best starter kit from scratch. Below is an overview of how to create a customized, high-quality e-cig kit that lasts a long while but won't break your budget. But before we get into that, realize that it is an investment at first, but in the long-run, it is well worth the money. To really put it into perspective, you will never realize such savings from $5.99 disposable e-cigs. For the best deal on a custom-built starter kit, heed the helpful hints below: 

Begin with The Battery - Variously called "chambers," batteries are the most vital components of e-cig kits. Shaped like long cylinders to resemble conventional cigarettes, e-cig battery designs represent a large range of sizes, colors and capacities. The single most important spec is battery life. Look for at least 280 mAh to get roughly 300 puffs from a full charge. Anything less is likely to yield more frustration from time wasted on frequent recharges than savoring your favorite nicotine taste sensation.

Chargers - A close second runner up to the battery is the e-cig charger. Most starter kits include a USB charger but some come with a plug-in wall or car adapter. Electrical wall outlets recharge much faster than USB or car chargers. Whichever charging device(s) you decide best will suit your lifestyle, verify that the cord that leads to the battery's bottom is long enough to let you vape while recharging.

Cartomizers vs. Cartridges - Most beginner kits include several disposable cartridges, each prefilled with 1 ml of e-liquid. A better pick is a starter kit with two refillable cartomizers and a complementary bottle of e-liquid. This affords a much wider variety of flavors that come in a higher quantity of controllable quality.

E-Liquid that sits inside a cartomizer is partially vaporized with every puff, thus gradually losing freshness and flavor. Thanks to transparent Pyrex tanks, remaining e-liquid level is visible. This gives you the ability to pour in just enough and let the unused portion "steep" in a refrigerated bottle to keep it fresh and strong each time you vape. Besides that, simple math will quickly reveal great savings gained from every refill.

We hope these tips help you on your joureny to building the best vape starter kit possible from Crystal Canyon Vapes.