4 Tips For Avoiding a Cracked Vape Tank

Just like any other hobby, vapers can run into problems right from the get go. Unfortunately, most of the problems occur to newbies who have not fully educated themselves about vaping or what to look out for that will help them take care of their equipment. Because of this, we will explore the 4 best tips to consider that will help you avoid a cracked vape tank.

Tip #4: Avoid Placing Your Vape Tank In Your Pocket
Accidents happen, we get that. But you should never make a bad habit of sticking your vape tank in your pocket. The pocket is the most convenient place for storing your vape tank while it's not in use. Not only is a bad idea, but it can be a costly error that you want to avoid. You run a much higher risk of forgetting about it and as soon as you sit down, you hear a crunching sound. Another reason why your pocket is a bad idea is that you may accidentally add your coin change. These metallic coins have the potential to cause an explosion if they touch the batteries.

Tip #3: Look At The E-Juice's PG/VG Ratio Before Filling the Vape Tank
Knowing the PG/VG ratio of your e-juice will allow you to know how well your vaporizer will function. It also can be a determining factor in the possibility of your vape tank cracking. The main reason is that VG is very viscous, so it takes longer than normal for the wick to be soaked enough where the juice reaches the coil. 

When the next puff is taken, you experience a dry hit. If you experience too many dry hits after a while, your vape tank runs the risk of cracking. To prevent any possible cracking, the best solution is to add a good amount of PG so that you'll avoid the dry hits.

Tip #2: Look at the Electronic Cigarette or MOD's Voltage/Wattage Settings
A lot of e-cigs today have a variable wattage and variable voltage setting. The Best and safest of the two is the variable wattage. The main reason is that you won't experience any overheating that could not only damage your coil but also make your vape tank crack.

So now that you know why it would be wise to stick to a variable voltage setting, you can rest assured that your vaping experience will go without a hitch.

Tip #1: The Vape Tank's Material - Buy Glass or Pyrex over Plastic
Vape tanks make up more than 50% of sales relating to vaping products. The main cause for such a high rate of sale is due to certain e-juice flavors that vapers have reported to have been making their vape tanks crack.

It has been discovered by several sources that certain e-juices react to the polycarbonate plastic that manufacturers use for the vape tanks. Because of this, enzymes in the e-juice begin to react causing the plastic to crack.

If you have ever experienced a cracked vape tank, then you have been witness to a very messy situation. But having a mess shouldn't be your big worry. Your big worry should be knowing which e-juice is causing the reaction with your vape tank. Or, you can upgrade to a pyrex glass vape tank and your problem is solved.

Conclusion
Hopefully, you won't come across any problems concerning cracking. But if you do, it would be a good idea to invest in a glass tank before you return to your regular e-juice flavors. We all know that every e-juice tank is different. This is why some will be able to withstand a lot more everyday occurrences, like the ones listed above. 

If you become one of the unfortunate vapers to experience a cracked vape tank, then you should seriously invest the extra money for a pyrex glass tank. For their price, you are making an investment that will allow you to enjoy every e-juice available. Keep in mind though, you won't want to mishandle your e-cig anymore by tossing it or forgetting you have it in your pocket before you decide to sit down.

In the end, having a cracked vape tank can be a real drag if you are just beginning to vape. But, taking these four tips with you will ensure that you will never run into a problem.

3 Quick Ways to Identify A Damaged Vape Tank

\

Regardless, if you just bought your first electronic cigarette (non-disposable) or have been vaping for years, everyone experiences the occasional leaky or gurgling vape tank. In this article, we will discuss 3 quick ways to identify a damaged vape tank and what you can do to try and fix the problem.

The first problem that many vapers encounter after buying a new tank is leaking. The tank can leak from the bottom or the top but they are both easy to fix. If the tank is leaking from the bottom, first try adjusting your air flow holes to the lowest setting when you aren't using the tank. This will prevent juice from leaking out of the tank's air flow holes. If the tank continues to leak after the airflow has been restricted, this indicates that the rubber O-rings on the inside of the tank have been installed incorrectly or are damaged. To change the O-rings, remove the Pyrex glass from your tank and locate the rubber seals on the top and bottom base of the tank, these are the O-rings. Check to make sure they are properly installed and do not have any rips or tears in them. If they are damaged, they must be replaced to stop the leaking. If your tank is leaking from the top, make sure that you have been storing it in an upright position.

The second problem that seems to happen quite frequently is spitting. "Spitting" is when hot vape juice is shot through the chimney and into the mouth of the user. It can be quite unpleasant and sometimes painful. If your tank is spitting, the juice is being wicked faster than it can be vaporized. What this means is that the wick inside of the coil is soaking up juice faster than the coil is vaporizing it and hot juice is being sucked up the chimney through the mouthpiece. Typically, this problem can be fixed by increasing the wattage on your device. If the wattage on your device can't be adjusted then it is recommended that you use a thicker juice to eliminate spitting.

Have you ever heard a gurgling noise coming from inside of your tank? Have no fear as this problem is quite normal and is easily fixed. If your tank is gurgling, it means that you've added too much e-liquid and flooded the atomizer! Don't worry though, this can quickly be fixed by taking the atomizer off, wrapping a towel around the opening, and giving it a few firm shakes. If done correctly, the excess juice will come out of the atomizer and be absorbed by the towel. You can then reassemble your tank and continue vaping.

Hopefully, with this information, you are now able to recognize a broken or damaged vape tank and troubleshoot the problems. Whether the problem is spitting, gurgling, or leaking, all vapes do require a small amount of upkeep to keep them in a good working condition. The enjoyment that you will receive from the hobby of vaping is well worth the small amount of time that you put into maintaining your vaping device.

Empire Turkish RY4 Tobacco

A complex blend of Turkish and Eastern Tobaccos that come together for a rich smooth blend. We've also introduced some RY4 elements into this e-liquid to make it unique!

Slightly sweet Turkish Tobacco with a warm smooth body and aromatic high notes, complimented by a blend of creamy Caramels for just the right amount of Sweetness.

Exhaling thru your mouth gives you a sweeter Tobacco flavor while exhaling thru your nose provides a richer, bolder experience. This vape is sure to be the golden treasure of any Empire!

Flavor profile: Turkish, Tobacco, Caramel, RY4, Semi Sweet

Choose your options

60, 30 and 15 ml bottles are glass and come with a glass dropper. 5ml bottles are plastic.

Don't Sleep on Steeping

Most people think of steeping as relating to making tea or infusing flavors into foods. A lesser known use for steeping is to both enhance the quality of e-liquid for vapes and remove any residual flavor of the bottle and traces of alcohol. By taking a closer look at steeping your e-liquid, you'll quickly see that it isn't just for tea anymore. 

What it is:

Steeping in its simplest form is soaking something in a liquid to either draw out a flavor or infuse the flavor of the liquid into any food similar to marinating a piece of meat. This same process can be utilized to maximize the flavor of typical e-liquid and elevate it to a much higher quality. The underlying science behind steeping is oxidation. Oxidation occurs when the e-liquid reacts with the oxygen in the air to remove any alcohol present. Oxidation also gives your e-liquid a much darker and aesthetically pleasing look than juice that hasn't been steeped. 

How it is done:

The process of steeping is actually quite simple if you're willing to wait. First, you need to find a cool and dark place to store your e-liquid for anywhere from six days to two weeks. Simply remove all labels from your e-liquid bottles place in the previously identified cool and dark place and wait. Once a day you should take the bottle out of hiding, give them a good shake, and briefly open them and expose them to the air to induce oxidation within the e-liquid. While performing this daily ritual, be sure not to expose the bottles to light for too long or else this can decrease the overall quality of your e-liquid. For those of you who don't want to wait quite as long but still want to reap the benefits of steeping, there is a process for you as well. Simply place your unlabeled bottles of e-liquid into a sealed bag and place this bag into a warm bath. The bath should be hot but not too hot that you are unable to place your hand into it. Once the warm bath cools, simply take the bottles back out of the bag and open each one to expel the unwanted gases. 

Why you should be doing it to your e-liquid bottles before vaping them:

Most people begin vaping as a way to wean themselves off of traditional cigarettes. Whether it was because a doctor told you to, for a family member or just for yourself, health concerns or health goals are one of the main driving forces in the transition away from cigarettes. Not only will steeping your e-liquid before vaping it make your juice taste great, but it will give you even more health returns than previously thought. By removing alcohol and harsh chemicals associated with the bottling process, steeping your e-liquid is a simple process that is well worth the wait.

Vaping has offered freedom for thousands of people who wanted to transition away from traditional cigarettes. Not only does vaping offer a healthier alternative to cigarettes but it can also offer a plethora of enjoyable flavors for every individualized taste. Steeping your e-liquid before vaping it only enhances the already pleasurable flavors that are offered on the market today. Remember, don't sleep on steeping.

Ways for Keeping Your Drags Shorter

Let us face it, vaping is cool, not to mention that it is a better alternative to smoking. However, in bid to keep enjoying your favorite e-juice with your favorite unit that you got from Crystal Canyon Vapes, you must incur cost in constantly replacing parts and the e-liquid. However, if you are taking good care of your vaping supplies and handling them right, you should be able to save some bucks. And, taming the duration of your drags is one way of lengthening the lifespan of your unit.

Aside from ruining your electronic cigarette or MOD, taking longer drags could be harmful to your health, especially the lungs. Yes, we cannot deny the fact that vaping is a better option. However, if we are always taking short drags, we run the risk of ruining our lungs by decreasing the lung capacity. Also, it could lead to pneumonia. Besides, vaping involves the inhalation of vapor and nicotine.

With that said, here are some tips to help you take shorter drags and how it will help in improving the lifespan of your atomizer and to help preserve your health.

Before we can begin solving the problem, it is important to understand why vapers take long drags in the first place. The answer is simple. They take long drags because they think of it as the only way to get massive clouds. However, what most vapers don't understand is that you can take shorter drags and still reach the lung capacity. Taking short drags in quick successions will ensure that you get the desired lung capacity, but without putting stress on your device.

To be able to take shorter drags and still get a decent amount of vapor, it is important that you invest in the right atomizer. If you get a 510 atomizer or a low resistance atomizer then you will not have to take long draws to produce large clouds. These atties can produce awesome amounts of vapor even when you are taking shorter draws. Therefore, by investing in a high-power atomizer, you don't have to necessarily strain your device with long draws

Having adequate amounts of e-juice in your vape tank, always, will ensure that you are satisfied with taking shorter draws. As the e-liquid begins to deplete, the flavor starts to diminish and the clouds of vapor appear to be thinner. It is at this point that many vapers decide to start taking longer draws, not knowing that they are only making things worse and running the risk of getting burnt hits. Instead of opting for longer draws, first check the level of your e-liquid. If running low, refill your tank and you will not have to take longer draws to get you satisfactory cloud quality. Also, by taking shorter draws, you can go slow on the vape juice. Therefore, it will reduce your total costs of the liquid.

Shorter draws are the best way to inhale. This is because they help you to lengthen the lifespan of your atomizer and e-liquids, thereby reducing the cost of replacement for these vaping supplies. Other than being cost-efficient, shorter draws are advised to anyone who cares about their health. Therefore, we advocate for every vaper to try and take shorter draws. Besides, shorter draws do not have to mean that you are compromising on the vapor production. The quick successions techniques should be able to help you take shorter draws and still maintain a worthy vapor. And, investing in a low resistance atomizer will also help you achieve the same, only that you do not have to take long draws.

Can Too Cool of a Storage Place Damage The E-Liquid's Flavor or Contents?

While it's widely known that e-liquid comes in a multitude of flavors and thus plenty of ingredient variations to choose from, those who partake in the past time may not be 100% informed on the proper ways of maintaining their liquids as far as temperature control goes. There are questions surrounding what the proper temperatures to store an e-liquid might be and there is always going to be speculation that differs should you choose to get your information from a forum. While you can find some experts on the subject from such a source, this guide is meant to break down the details behind the proper care and maintenance of e-liquid for storing in cold and hot temperatures.

Heat Plus E-Liquid Equals Degradation
While you may be so concerned over whether or not to store your e-liquid in a fridge or freezer or perhaps another cold area, such as your car during the winter months, you may need to be more concerned with the heat when it comes to preserving the quality of your e-liquid. No matter what your liquid is made from, the heat and direct sunlight are the main causes behind aging anything to do with your liquid. This will also affect the overall flavor, so be sure not to forget your liquid in your car for too long in the summer.

Is Perspiration an Issue?
If you're worried that water might be added to your e-liquid if it's exposed to the cold for too long, that shouldn't be too much of a worry. Unless you are exposing your juice to a warm environment and then a cold one repeatedly, there is no possibility of water being created in your e-liquid container. This is especially true if you are storing your e-liquid in the fridge unopened or if it is in a tightly sealed container. Should you clean out a container and move the e-liquid from its original packaging to a new container, make sure it is thoroughly dried out before making that switch. Otherwise, you will be more likely to introduce water to the e-liquid.

Can Leaving E-Liquid in a Cold Environment Degrade the Nicotine?
There's a chance that you will be preserving the nicotine better by having it in a cold environment, such as a fridge, rather than storing it at room temperature. Since e-liquid is more finicky when it comes to hot environments and light exposure, leaving it in a cold and dark environment would be more ideal. This is the case if you live in a home or apartment that has poor cold airflow, such as during the hot summer months.

You are more likely to degrade the quality of your nicotine and age the ingredients in your nicotine much faster if you have it sitting on your windowsill or on a counter that receives a lot of direct sunlight, than if you were to leave it in your fridge for a few weeks. Plenty of DIYers will leave their nicotine in their freezer long-term. This can minimize the breakdown of your e-liquid's ingredients and will lessen oxidation over time.

Proper Use After Freezing or Cooling
Once you take your nicotine out of the fridge or freezer, allow it time to warm up before using it. This is more a choice of personal quality, since while it is cold, the liquid will be less viscous so it will not wick as well while cold.

Timber Frost at CCVAPES

Timber Frost is the perfect blend of fresh Wintergreen and sweet mints. Its blended with the right amount of Menthol for that cool, frosty sensation!

The sweetness of our Wintergreen contrasts nicely against the Menthol and is not over powering. Easily an all day vape that is refreshing any time.

Special thanks to Vapor Ree from our Facebook Group for naming this flavor!

Vaping and The Throat Hit Effect

One significant factor that for those who love to engage in the practice, is the quality of the throat hit that one gains in the process of vaping. It has even affected the type of vaping devices that are designed. A great throat hit can make a person to cough while a gentle throat punch smoothly moves down the throat.

The E-Liquid
The most important source of the throat hit is the PG/VG (Propylene Glycol / Vegetable Glycerin) proportion associated with the particular e-juice in thevaping device. PG is suitable for persons who are in search of a powerful throat hit, while for those who are only interested in a smoother throat hit are encouraged to use the VG type of e-juice. On the other hand, the throat hit obtained from PG is less satisfying unlike that which is gained from the use of nicotine. However, the throat hit associated with PG is powerful and it can be felt like a sharp biting sensation at the rear of the throat. For a PG/VG ratio of about 40/60 and 60/40, the throat hit is typically considered to be tough and very powerful consecutively. PG provides a punchier throat hit while that of nicotine which is more robust.

The Type of Vape Tank
For the best result in the process of vaping, it is important not undermine the importance of the vaping tank that is selected. The vaping tank is designed to match a vaping device, and it is imperative since this helps to meet different personal preferences. When this important fact is not considered in the process of acquiring a tank or the vaping device, one can easily miss out on the great throat punch that is delivered through the course of vaping, and therefore, will not be satisfied. The set up plays a huge role in affecting the quality of vapor that will be released. If the tank and the mod don’t match well, then the gas that will be obtained in the process is entirely unsatisfactory for both the tongue and the lungs. The best tanks are the ones which have been designed using glass material.

The Types of Coils and Wicks
The quality of the throat hit depends on the wick or coil that is used in vaping. Most people will tend to ignore the importance of the wick material, due to the massive dominance of cotton in the vaping devices. Using other materials for the wick provides a much better throat hit.
The use of cotton is extensive because most people consider it to provide a cleaner flavor. However, it does not provide a stronger throat hit as most people would expect. For a mild throat hit, cotton is the best. However, for a much greater punch in the throat, rebuildable atomizer would be the most suitable option. The use of hemp wicks also avails a very powerful throat hit.

Type of Vaping Device
It has never been entirely clear how the vaping device affects the throat punch and overall satisfaction that one gets unlike for the different PG/VG ratios, flavors, and nicotine. When vaping began, tank systems were most commonly used in the process. To get a great throat punch, one would have to use an e-juice containing a lot of nicotine and higher PG. However, in the advent of mods, there was less need of using concentrated nicotine, flavor, and PG. Therefore, high-power devices help people to get a stronger throat hit regardless of the e-juice being used.

Options are usually unlimited when one selects a mod that has different wattage levels since adjustments can easily be made to ensure that the best throat hit is obtained.

As much as vaping tends to be a new, it is a tradition that is being adopted rapidly. Additionally, it tends to embrace technology. Regarding price, the use of vaporizers and E-cigarettes helps to cut down on the cost. For E-Cigarettes, there are no recurrent costs like in the use of cigarettes. Finally, vaping leads to a complete cessation of smoking, which is very important for the health of individuals.

How Can The PG/VG Ratio in Your E-Liquid Affect Your Vape Tank?

At one time crafting e-juice from scratch was a hobby I enjoyed that taught me a lot about what goes into the juices we vape. From the flavorings to the nicotine to the PG/VG ratio, composing a good juice was about understanding the role these substances played and balancing them according to personal preference and purpose. Whether it's clouds or flavor, pen or sub ohm tank, the ratio of propylene glycol (PG) and vegetable glycerin (VG) form the basis of the effectiveness juice can have on the user's experience. With this knowledge, I would like to help you understand the difference in PG and VG, and how the ratio of the two can affect flavor and clouds depending on what type of device is being used.

Propylene glycol is a man-made chemical developed for use in everything from soaps and deodorant to inhalers and nebulizers. Very few people suffer a mild allergy to the substance and for this reason look to juices that have more VG. However, the FDA has labeled the substance to be "generally recognized as safe" for use in food, having anti-fungal and antimicrobial properties that help to balance the organic nature of vegetable glycerin. Its solubility makes it the ideal base for the flavorings used in e-juices, and nearly all the most popular flavorings that companies use come pre-mixed into a solution of PG. For this reason, PG is known as the flavor carrying agent in e-juices, as it has a smaller molecular structure that allows the molecules in the flavoring itself to be more easily integrated. The amount of PG you want in your juice depends on what type of tank used and the desired experience. Flavor chasers will look for a juice that contains an equal balance of the two. In tanks that produce less vapor such as the smaller skinnier vape pen tanks, a thinner more flavor-heavy juice is needed to offset the lack of cloud production and wicking capability. Propylene glycol itself does not adversely affect Pyrex or plastic tanks, but it should be noted that acidic juices with higher amounts of PG will contain a stronger concentration of flavor and could potentially crack the tank. The thinness of PG allows these tanks to properly wick the juice.

Vegetable glycerin is naturally derived from plants and is the substance that works to produce clouds. While it does have flavor carrying capabilities, it is less effective to this end. For those of us who chase clouds, less of the flavoring agent is required as the amount of vapor big sub-ohm tanks produce have the volume necessary for flavorful hits. On setups designed for cloud production, a mix with too much PG will be so thin that spit back may occur as the wick becomes over-saturated too quickly. Generally, those looking for cloud production go for a juice with the highest amount of VG possible. MODs equipped with bigger tanks have the power and wicking ability to handle juices heavy with vg, and these larger tanks provide enough room for the thicker liquid to disperse. Most large tanks are made with Pyrex or glass, neither of which will be adversely affected by VG. However, some of these are being coated with cheap paint that can chip off, so avoid using these altogether. Beware of juices claiming to be 100% VG as the flavorings themselves are based in PG, so achieving a pure vg mix is nearly impossible. But depending on the amount of flavoring used some juices can have as much as 90 percent vegetable glycerin in their mix.

Understanding these properties should help you to more accurately choose the ratio of PG/VG you need depending on the type of tank and your preference of cloud vs. flavor production. Remember that not all juices and tanks are the same so your personal satisfaction relies on properly balancing the two to achieve the desired experience.

Key Largo E-Liquid At Crystal Canyon Vapes

Key Largo is a decadent Key Lime Pie created with fresh, zesty Key Limes that burst with a bright, tangy and aromatic flavor!

The pie filling is smooth and creamy lending sweetness to contrast with the tart citrus. Generously layered on top of a rich Graham Cracker pie crust.

Born in the Florida Keys and delivered to your door, this classic dessert can be enjoyed year round. So sit down, relax and enjoy this southern treat!

Flavor profile: Tart, Lime, Citrus, Graham Cracker, Slightly Sweet, Creamy

The Double Barrel Legend

Legend has it, an old prospector traveled west during the gold rush, bringing along his favorite, smooth rich tobacco blend. He stored it in two empty barrels of butterscotch.

Along the journey, his tobacco took on the sweet creamy flavor of the butterscotch and created a smooth, slightly sweet flavor.

Later after not having struck gold, the prospector began barreling tobacco with a blend of butterscotch and unsweetened caramel. This flavored tobacco quickly became popular in the local towns and saloons.

Till this day, no one knows exactly how the old prospector created his smooth, slightly sweet blend known as "Double Barrel No 5". But we have managed to recreate that same smooth rich tobacco with a decadent butterscotch and hints of caramel! Easily an all-day vape, you will not have to go prospecting to enjoy the legendary blend No 5!

3 Methods For Having A Proper Sub-Ohm Vaping Session

Sub-ohm vaping is the art of vaping with coils that have a resistance of below 1 Ohm. This type vaping is popular among seasoned vapers who are looking for enhanced flavor and a greater vapor output. However, for them to achieve all the perks of sub-ohm vaping, there are certain things that need to be done. For those who are ready to enter this realm, here are 3 methods to ensure that you have a fulfilling sub-ohm session once you have the MOD picked out that is sub-ohm compatible (Note: if the MOD itself is not sub-ohm compatible, it will not perform properly below 1 Ohm and even worse, damage the device and possibly cause injury, too) 

Direct Lung Vaping

When getting into the sub-ohm vaping world, it is important to understand that the right technique for this type of vaping is the direct lung vaping. You must learn the art of inhaling directly into your lungs instead of inhaling to your mouth first. One of the greatest benefits of this method is stronger a throat hit as you exhale.

Choosing an E-Liquid

To have a great sub-ohm vaping experience, you must choose the right e-liquid from Crystal Canyon Vapes. With sub-ohm vaping, even if you were a heavy smoker, you will not need that much nicotine to get the satisfaction needed. A good rule of thumb is to go for anything that is below 6mL. Remember, with this type of vaping style, you draw power directly from the batteries. For this reason, papid vaporization of e-juice happens, leading to the production of vapor at the same time. Therefore, you will only need a small amount of nicotine. Any amount above 6mL will lead to a harsh throat. Additionally, when selecting the liquid to use for this, you need to check the PG/VG ratio. PG is responsible for carrying the flavor, hence, a great in throat hit. But because better throat hit is the reason for sub-ohm vaping, you will not need a lot of PG. What you will need though is a VG ratio of above 70%. Vegetable Glycerine is viscous and is responsible for the production of massive clouds, which am sure is what you are looking for.

Batteries

Sub-ohm vaping uses a lot of power. Therefore, you must be willing to invest in a powerful battery. Sure, there are cheap batteries out there, but they are not worth it. They will not support the performance of your MOD(s), and you must keep changing them. And in the worst-case scenario, they might explode and cause you injuries and damages. So, always go for sub-ohm batteries from a reputable manufacturer. Also, ensure that they have a high-power output of about 200 Watts. Let no one deceive you into buying MODs with cheap pre-built batteries. Most of the cheap sub-ohm devices use low-quality lithium-ion batteries, which become vulnerable to exploding.

Seeing vapers chasing clouds will get you wishing that you could do the same, and the only way to do so is through the art of sub-ohm vaping. However, to get a great sub-ohm experience, you must observe safety, use the right e-liquid, have the right batteries and MODs, and know the right vaping technique for doing this.