4 Tips For Avoiding a Cracked Vape Tank

Just like any other hobby, vapers can run into problems right from the get go. Unfortunately, most of the problems occur to newbies who have not fully educated themselves about vaping or what to look out for that will help them take care of their equipment. Because of this, we will explore the 4 best tips to consider that will help you avoid a cracked vape tank.

Tip #4: Avoid Placing Your Vape Tank In Your Pocket
Accidents happen, we get that. But you should never make a bad habit of sticking your vape tank in your pocket. The pocket is the most convenient place for storing your vape tank while it's not in use. Not only is a bad idea, but it can be a costly error that you want to avoid. You run a much higher risk of forgetting about it and as soon as you sit down, you hear a crunching sound. Another reason why your pocket is a bad idea is that you may accidentally add your coin change. These metallic coins have the potential to cause an explosion if they touch the batteries.

Tip #3: Look At The E-Juice's PG/VG Ratio Before Filling the Vape Tank
Knowing the PG/VG ratio of your e-juice will allow you to know how well your vaporizer will function. It also can be a determining factor in the possibility of your vape tank cracking. The main reason is that VG is very viscous, so it takes longer than normal for the wick to be soaked enough where the juice reaches the coil. 

When the next puff is taken, you experience a dry hit. If you experience too many dry hits after a while, your vape tank runs the risk of cracking. To prevent any possible cracking, the best solution is to add a good amount of PG so that you'll avoid the dry hits.

Tip #2: Look at the Electronic Cigarette or MOD's Voltage/Wattage Settings
A lot of e-cigs today have a variable wattage and variable voltage setting. The Best and safest of the two is the variable wattage. The main reason is that you won't experience any overheating that could not only damage your coil but also make your vape tank crack.

So now that you know why it would be wise to stick to a variable voltage setting, you can rest assured that your vaping experience will go without a hitch.

Tip #1: The Vape Tank's Material - Buy Glass or Pyrex over Plastic
Vape tanks make up more than 50% of sales relating to vaping products. The main cause for such a high rate of sale is due to certain e-juice flavors that vapers have reported to have been making their vape tanks crack.

It has been discovered by several sources that certain e-juices react to the polycarbonate plastic that manufacturers use for the vape tanks. Because of this, enzymes in the e-juice begin to react causing the plastic to crack.

If you have ever experienced a cracked vape tank, then you have been witness to a very messy situation. But having a mess shouldn't be your big worry. Your big worry should be knowing which e-juice is causing the reaction with your vape tank. Or, you can upgrade to a pyrex glass vape tank and your problem is solved.

Conclusion
Hopefully, you won't come across any problems concerning cracking. But if you do, it would be a good idea to invest in a glass tank before you return to your regular e-juice flavors. We all know that every e-juice tank is different. This is why some will be able to withstand a lot more everyday occurrences, like the ones listed above. 

If you become one of the unfortunate vapers to experience a cracked vape tank, then you should seriously invest the extra money for a pyrex glass tank. For their price, you are making an investment that will allow you to enjoy every e-juice available. Keep in mind though, you won't want to mishandle your e-cig anymore by tossing it or forgetting you have it in your pocket before you decide to sit down.

In the end, having a cracked vape tank can be a real drag if you are just beginning to vape. But, taking these four tips with you will ensure that you will never run into a problem.

Several Tips For Keeping Your Vape Gear Organized

As you go up the vaping ladder so does your vape gear. With time, you’ll find that you have acquired a lot of vaping devices, e-liquids and accessories from Crystal Canyon Vapes, and storing them will not be as easy as it was on your first days of vaping. If you’re finding it difficult to keep your vape supplies, whether when traveling or just at home, then here are several tips to help you through.

Tip #1: Plan for Storage
The first step to keeping your vape gear organized is to get the right type of storage. If you’re in transit, you can purchase a specialized case that has compartments to fit your different accessories. However, if you are just at home, a storage container is more suitable. It’ll accommodate more supplies. You can visit your nearest convenience store and get a storage container that comes with dividers, allowing you to compartmentalize. Such storage containers allow you to create compartments depending on the size of your vape gear. At the end of the day, you’ll find that everything you need for your vape session, is in one place.

Tip #2: Tidy Up
Want to get rid of clutter? The key is in cleaning up. Simple enough, right? Every other week, dedicate a few minutes to clean your used vape gear. Also, take the time to wipe your storage case or container. This way, it ‘l be much easier to identify what is what, when you need it. Additionally, it helps keep your vape supplies more organized.

Tip #3: Labeling
Labeling is crucial is you want your vape gear to stay organized. Sometimes, you might have accessories which look the same but have very distinct characteristics. To tell them apart, without tearing your storage container apart, you need to keep everything well-labeled. Labeling only helps to make your organizing work easy. Also, it helps you easily locate what you need by pointing to you where it is. 

Tip #4: Play Around
One of the reasons why vapers find it difficult to keep their gear organized is because they find it really boring. Therefore, if you could learn how to play around with your storage gear, them it would be all okay. Try using your favorite brand stickers to keep the storage container looking fresh.

There are many reasons as to why one would want their vape supplies to stay organized. For some, it’s simply the urge to have everything organized. For others, it’s all about keeping their vape gear away from children and pets in their homes. While others simply want the convenience of finding vape supplies easily. Regardless of your reason to keep it organized, the above tips will give you the ideas necessary on how to get it all together.

3 Ways To Prevent Vaper's Tongue

Vaping has become a very popular trend among those are looking to live a better lifestyle and want to avoid the dangers of smoking traditional tobacco cigarettes. You avoid a lot of the chemicals and carcinogens that are in cigarettes and vaping tends to be a lot less of a nuisance to those that are around you on a regular basis. 

However, one downfall to being a dedicated vaper is something that is referred to as "vaper’s tongue". It is not what you think it might be, which many guess is maybe a coating on the tongue from the process of vaping. Vaper’s tongue actually refers to suddenly experiencing a lack of flavor when smoking and come about from a number of different reasons whether it be dehydration or illness.

Vaper’s Tongue
The first reaction a person will normally have is thinking that something has gone terribly wrong with their electronic cigarette that has caused them to no longer taste the vape juice flavor that they have been using. In actuality, these flavorless inhalations have nothing to do with the device or the liquid being used. The vaper actually is experiencing a decreasing flavor effect that comes from their habit.

How Can You Prevent Vaper’s Tongue?
There are a number of different ways that you can avoid this annoying problem from occurring so that you can go back to enjoying your favorite e-liquids from Crystal Canyon Vapes: 

• Tip #1: Stay Hydrated - Dehydration is one of the most common reasons for experiencing vaper’s tongue. If you aim for the recommended eight to ten glasses of water per day, you will not only reap the health benefits of being well-hydrated but you will also be able to better taste and experience your juice from your device.
• Tip #2: Don’t Overdo One Specific Flavor -  Everything should be consumed in moderation and E-liquid flavors are no different. If you constantly are using the same flavor over and over this can lead to diminished flavoring. Switch your flavors up a bit or at least rotate a couple of different varieties in order to prevent your body from adapting to the smell and taste. 
• Tip #3: Keep Your Nasal Passages Clear - If you have had a cold or allergies before then you know what comes about when you are stuffed up. You tend to experience a diminished sense of taste and smell. Your sense of smell is very much related to your sense of taste. If you are sick or just tend to be someone that is often stuffed up, you may want to utilize something like saline sprays to help reduce inflammation in the nose and help you breathe better. The end result is being about to better experience your e-liquid flavors.

You can easily avoid that dreaded vaper’s tongue by just slightly changing your vaping routine. This way, you can enjoy the products you like the best without having to completely change what you are using.

3 Quick Ways to Identify A Damaged Vape Tank

\

Regardless, if you just bought your first electronic cigarette (non-disposable) or have been vaping for years, everyone experiences the occasional leaky or gurgling vape tank. In this article, we will discuss 3 quick ways to identify a damaged vape tank and what you can do to try and fix the problem.

The first problem that many vapers encounter after buying a new tank is leaking. The tank can leak from the bottom or the top but they are both easy to fix. If the tank is leaking from the bottom, first try adjusting your air flow holes to the lowest setting when you aren't using the tank. This will prevent juice from leaking out of the tank's air flow holes. If the tank continues to leak after the airflow has been restricted, this indicates that the rubber O-rings on the inside of the tank have been installed incorrectly or are damaged. To change the O-rings, remove the Pyrex glass from your tank and locate the rubber seals on the top and bottom base of the tank, these are the O-rings. Check to make sure they are properly installed and do not have any rips or tears in them. If they are damaged, they must be replaced to stop the leaking. If your tank is leaking from the top, make sure that you have been storing it in an upright position.

The second problem that seems to happen quite frequently is spitting. "Spitting" is when hot vape juice is shot through the chimney and into the mouth of the user. It can be quite unpleasant and sometimes painful. If your tank is spitting, the juice is being wicked faster than it can be vaporized. What this means is that the wick inside of the coil is soaking up juice faster than the coil is vaporizing it and hot juice is being sucked up the chimney through the mouthpiece. Typically, this problem can be fixed by increasing the wattage on your device. If the wattage on your device can't be adjusted then it is recommended that you use a thicker juice to eliminate spitting.

Have you ever heard a gurgling noise coming from inside of your tank? Have no fear as this problem is quite normal and is easily fixed. If your tank is gurgling, it means that you've added too much e-liquid and flooded the atomizer! Don't worry though, this can quickly be fixed by taking the atomizer off, wrapping a towel around the opening, and giving it a few firm shakes. If done correctly, the excess juice will come out of the atomizer and be absorbed by the towel. You can then reassemble your tank and continue vaping.

Hopefully, with this information, you are now able to recognize a broken or damaged vape tank and troubleshoot the problems. Whether the problem is spitting, gurgling, or leaking, all vapes do require a small amount of upkeep to keep them in a good working condition. The enjoyment that you will receive from the hobby of vaping is well worth the small amount of time that you put into maintaining your vaping device.

Don't Sleep on Steeping

Most people think of steeping as relating to making tea or infusing flavors into foods. A lesser known use for steeping is to both enhance the quality of e-liquid for vapes and remove any residual flavor of the bottle and traces of alcohol. By taking a closer look at steeping your e-liquid, you'll quickly see that it isn't just for tea anymore. 

What it is:

Steeping in its simplest form is soaking something in a liquid to either draw out a flavor or infuse the flavor of the liquid into any food similar to marinating a piece of meat. This same process can be utilized to maximize the flavor of typical e-liquid and elevate it to a much higher quality. The underlying science behind steeping is oxidation. Oxidation occurs when the e-liquid reacts with the oxygen in the air to remove any alcohol present. Oxidation also gives your e-liquid a much darker and aesthetically pleasing look than juice that hasn't been steeped. 

How it is done:

The process of steeping is actually quite simple if you're willing to wait. First, you need to find a cool and dark place to store your e-liquid for anywhere from six days to two weeks. Simply remove all labels from your e-liquid bottles place in the previously identified cool and dark place and wait. Once a day you should take the bottle out of hiding, give them a good shake, and briefly open them and expose them to the air to induce oxidation within the e-liquid. While performing this daily ritual, be sure not to expose the bottles to light for too long or else this can decrease the overall quality of your e-liquid. For those of you who don't want to wait quite as long but still want to reap the benefits of steeping, there is a process for you as well. Simply place your unlabeled bottles of e-liquid into a sealed bag and place this bag into a warm bath. The bath should be hot but not too hot that you are unable to place your hand into it. Once the warm bath cools, simply take the bottles back out of the bag and open each one to expel the unwanted gases. 

Why you should be doing it to your e-liquid bottles before vaping them:

Most people begin vaping as a way to wean themselves off of traditional cigarettes. Whether it was because a doctor told you to, for a family member or just for yourself, health concerns or health goals are one of the main driving forces in the transition away from cigarettes. Not only will steeping your e-liquid before vaping it make your juice taste great, but it will give you even more health returns than previously thought. By removing alcohol and harsh chemicals associated with the bottling process, steeping your e-liquid is a simple process that is well worth the wait.

Vaping has offered freedom for thousands of people who wanted to transition away from traditional cigarettes. Not only does vaping offer a healthier alternative to cigarettes but it can also offer a plethora of enjoyable flavors for every individualized taste. Steeping your e-liquid before vaping it only enhances the already pleasurable flavors that are offered on the market today. Remember, don't sleep on steeping.

Ways for Keeping Your Drags Shorter

Let us face it, vaping is cool, not to mention that it is a better alternative to smoking. However, in bid to keep enjoying your favorite e-juice with your favorite unit that you got from Crystal Canyon Vapes, you must incur cost in constantly replacing parts and the e-liquid. However, if you are taking good care of your vaping supplies and handling them right, you should be able to save some bucks. And, taming the duration of your drags is one way of lengthening the lifespan of your unit.

Aside from ruining your electronic cigarette or MOD, taking longer drags could be harmful to your health, especially the lungs. Yes, we cannot deny the fact that vaping is a better option. However, if we are always taking short drags, we run the risk of ruining our lungs by decreasing the lung capacity. Also, it could lead to pneumonia. Besides, vaping involves the inhalation of vapor and nicotine.

With that said, here are some tips to help you take shorter drags and how it will help in improving the lifespan of your atomizer and to help preserve your health.

Before we can begin solving the problem, it is important to understand why vapers take long drags in the first place. The answer is simple. They take long drags because they think of it as the only way to get massive clouds. However, what most vapers don't understand is that you can take shorter drags and still reach the lung capacity. Taking short drags in quick successions will ensure that you get the desired lung capacity, but without putting stress on your device.

To be able to take shorter drags and still get a decent amount of vapor, it is important that you invest in the right atomizer. If you get a 510 atomizer or a low resistance atomizer then you will not have to take long draws to produce large clouds. These atties can produce awesome amounts of vapor even when you are taking shorter draws. Therefore, by investing in a high-power atomizer, you don't have to necessarily strain your device with long draws

Having adequate amounts of e-juice in your vape tank, always, will ensure that you are satisfied with taking shorter draws. As the e-liquid begins to deplete, the flavor starts to diminish and the clouds of vapor appear to be thinner. It is at this point that many vapers decide to start taking longer draws, not knowing that they are only making things worse and running the risk of getting burnt hits. Instead of opting for longer draws, first check the level of your e-liquid. If running low, refill your tank and you will not have to take longer draws to get you satisfactory cloud quality. Also, by taking shorter draws, you can go slow on the vape juice. Therefore, it will reduce your total costs of the liquid.

Shorter draws are the best way to inhale. This is because they help you to lengthen the lifespan of your atomizer and e-liquids, thereby reducing the cost of replacement for these vaping supplies. Other than being cost-efficient, shorter draws are advised to anyone who cares about their health. Therefore, we advocate for every vaper to try and take shorter draws. Besides, shorter draws do not have to mean that you are compromising on the vapor production. The quick successions techniques should be able to help you take shorter draws and still maintain a worthy vapor. And, investing in a low resistance atomizer will also help you achieve the same, only that you do not have to take long draws.

Can Too Cool of a Storage Place Damage The E-Liquid's Flavor or Contents?

While it's widely known that e-liquid comes in a multitude of flavors and thus plenty of ingredient variations to choose from, those who partake in the past time may not be 100% informed on the proper ways of maintaining their liquids as far as temperature control goes. There are questions surrounding what the proper temperatures to store an e-liquid might be and there is always going to be speculation that differs should you choose to get your information from a forum. While you can find some experts on the subject from such a source, this guide is meant to break down the details behind the proper care and maintenance of e-liquid for storing in cold and hot temperatures.

Heat Plus E-Liquid Equals Degradation
While you may be so concerned over whether or not to store your e-liquid in a fridge or freezer or perhaps another cold area, such as your car during the winter months, you may need to be more concerned with the heat when it comes to preserving the quality of your e-liquid. No matter what your liquid is made from, the heat and direct sunlight are the main causes behind aging anything to do with your liquid. This will also affect the overall flavor, so be sure not to forget your liquid in your car for too long in the summer.

Is Perspiration an Issue?
If you're worried that water might be added to your e-liquid if it's exposed to the cold for too long, that shouldn't be too much of a worry. Unless you are exposing your juice to a warm environment and then a cold one repeatedly, there is no possibility of water being created in your e-liquid container. This is especially true if you are storing your e-liquid in the fridge unopened or if it is in a tightly sealed container. Should you clean out a container and move the e-liquid from its original packaging to a new container, make sure it is thoroughly dried out before making that switch. Otherwise, you will be more likely to introduce water to the e-liquid.

Can Leaving E-Liquid in a Cold Environment Degrade the Nicotine?
There's a chance that you will be preserving the nicotine better by having it in a cold environment, such as a fridge, rather than storing it at room temperature. Since e-liquid is more finicky when it comes to hot environments and light exposure, leaving it in a cold and dark environment would be more ideal. This is the case if you live in a home or apartment that has poor cold airflow, such as during the hot summer months.

You are more likely to degrade the quality of your nicotine and age the ingredients in your nicotine much faster if you have it sitting on your windowsill or on a counter that receives a lot of direct sunlight, than if you were to leave it in your fridge for a few weeks. Plenty of DIYers will leave their nicotine in their freezer long-term. This can minimize the breakdown of your e-liquid's ingredients and will lessen oxidation over time.

Proper Use After Freezing or Cooling
Once you take your nicotine out of the fridge or freezer, allow it time to warm up before using it. This is more a choice of personal quality, since while it is cold, the liquid will be less viscous so it will not wick as well while cold.

Vaping and The Throat Hit Effect

One significant factor that for those who love to engage in the practice, is the quality of the throat hit that one gains in the process of vaping. It has even affected the type of vaping devices that are designed. A great throat hit can make a person to cough while a gentle throat punch smoothly moves down the throat.

The E-Liquid
The most important source of the throat hit is the PG/VG (Propylene Glycol / Vegetable Glycerin) proportion associated with the particular e-juice in thevaping device. PG is suitable for persons who are in search of a powerful throat hit, while for those who are only interested in a smoother throat hit are encouraged to use the VG type of e-juice. On the other hand, the throat hit obtained from PG is less satisfying unlike that which is gained from the use of nicotine. However, the throat hit associated with PG is powerful and it can be felt like a sharp biting sensation at the rear of the throat. For a PG/VG ratio of about 40/60 and 60/40, the throat hit is typically considered to be tough and very powerful consecutively. PG provides a punchier throat hit while that of nicotine which is more robust.

The Type of Vape Tank
For the best result in the process of vaping, it is important not undermine the importance of the vaping tank that is selected. The vaping tank is designed to match a vaping device, and it is imperative since this helps to meet different personal preferences. When this important fact is not considered in the process of acquiring a tank or the vaping device, one can easily miss out on the great throat punch that is delivered through the course of vaping, and therefore, will not be satisfied. The set up plays a huge role in affecting the quality of vapor that will be released. If the tank and the mod don’t match well, then the gas that will be obtained in the process is entirely unsatisfactory for both the tongue and the lungs. The best tanks are the ones which have been designed using glass material.

The Types of Coils and Wicks
The quality of the throat hit depends on the wick or coil that is used in vaping. Most people will tend to ignore the importance of the wick material, due to the massive dominance of cotton in the vaping devices. Using other materials for the wick provides a much better throat hit.
The use of cotton is extensive because most people consider it to provide a cleaner flavor. However, it does not provide a stronger throat hit as most people would expect. For a mild throat hit, cotton is the best. However, for a much greater punch in the throat, rebuildable atomizer would be the most suitable option. The use of hemp wicks also avails a very powerful throat hit.

Type of Vaping Device
It has never been entirely clear how the vaping device affects the throat punch and overall satisfaction that one gets unlike for the different PG/VG ratios, flavors, and nicotine. When vaping began, tank systems were most commonly used in the process. To get a great throat punch, one would have to use an e-juice containing a lot of nicotine and higher PG. However, in the advent of mods, there was less need of using concentrated nicotine, flavor, and PG. Therefore, high-power devices help people to get a stronger throat hit regardless of the e-juice being used.

Options are usually unlimited when one selects a mod that has different wattage levels since adjustments can easily be made to ensure that the best throat hit is obtained.

As much as vaping tends to be a new, it is a tradition that is being adopted rapidly. Additionally, it tends to embrace technology. Regarding price, the use of vaporizers and E-cigarettes helps to cut down on the cost. For E-Cigarettes, there are no recurrent costs like in the use of cigarettes. Finally, vaping leads to a complete cessation of smoking, which is very important for the health of individuals.

How Can The PG/VG Ratio in Your E-Liquid Affect Your Vape Tank?

At one time crafting e-juice from scratch was a hobby I enjoyed that taught me a lot about what goes into the juices we vape. From the flavorings to the nicotine to the PG/VG ratio, composing a good juice was about understanding the role these substances played and balancing them according to personal preference and purpose. Whether it's clouds or flavor, pen or sub ohm tank, the ratio of propylene glycol (PG) and vegetable glycerin (VG) form the basis of the effectiveness juice can have on the user's experience. With this knowledge, I would like to help you understand the difference in PG and VG, and how the ratio of the two can affect flavor and clouds depending on what type of device is being used.

Propylene glycol is a man-made chemical developed for use in everything from soaps and deodorant to inhalers and nebulizers. Very few people suffer a mild allergy to the substance and for this reason look to juices that have more VG. However, the FDA has labeled the substance to be "generally recognized as safe" for use in food, having anti-fungal and antimicrobial properties that help to balance the organic nature of vegetable glycerin. Its solubility makes it the ideal base for the flavorings used in e-juices, and nearly all the most popular flavorings that companies use come pre-mixed into a solution of PG. For this reason, PG is known as the flavor carrying agent in e-juices, as it has a smaller molecular structure that allows the molecules in the flavoring itself to be more easily integrated. The amount of PG you want in your juice depends on what type of tank used and the desired experience. Flavor chasers will look for a juice that contains an equal balance of the two. In tanks that produce less vapor such as the smaller skinnier vape pen tanks, a thinner more flavor-heavy juice is needed to offset the lack of cloud production and wicking capability. Propylene glycol itself does not adversely affect Pyrex or plastic tanks, but it should be noted that acidic juices with higher amounts of PG will contain a stronger concentration of flavor and could potentially crack the tank. The thinness of PG allows these tanks to properly wick the juice.

Vegetable glycerin is naturally derived from plants and is the substance that works to produce clouds. While it does have flavor carrying capabilities, it is less effective to this end. For those of us who chase clouds, less of the flavoring agent is required as the amount of vapor big sub-ohm tanks produce have the volume necessary for flavorful hits. On setups designed for cloud production, a mix with too much PG will be so thin that spit back may occur as the wick becomes over-saturated too quickly. Generally, those looking for cloud production go for a juice with the highest amount of VG possible. MODs equipped with bigger tanks have the power and wicking ability to handle juices heavy with vg, and these larger tanks provide enough room for the thicker liquid to disperse. Most large tanks are made with Pyrex or glass, neither of which will be adversely affected by VG. However, some of these are being coated with cheap paint that can chip off, so avoid using these altogether. Beware of juices claiming to be 100% VG as the flavorings themselves are based in PG, so achieving a pure vg mix is nearly impossible. But depending on the amount of flavoring used some juices can have as much as 90 percent vegetable glycerin in their mix.

Understanding these properties should help you to more accurately choose the ratio of PG/VG you need depending on the type of tank and your preference of cloud vs. flavor production. Remember that not all juices and tanks are the same so your personal satisfaction relies on properly balancing the two to achieve the desired experience.

Tips for Increasing Vapor Production from Your MOD

Having an increased amount of vapor is the sure way to get the most out of your vaping experience. To achieve this, your battery must be able to put out the required power safely and the only way it can do that is by using sub-ohms. Batteries also can only provide a safe amount of current. This is referred to as the amp limit. So, make sure that you are aware that if you intend to utilize a MOD that requires its own battery, ensure that its battery's amp limit is continuous.

For those of you who have a more regulated and modern MOD that comes with a battery built-in, then you can enjoy all the vape you want without worrying. With that said, here are a few tips for increasing vapor production from your MOD.

Higher Power = Higher Vapor Amount

When using a basic device, the user must be aware that the only type of atomizer they can use is one with higher resistance that sends a fixed voltage. Although this will allow an increased amount of vapor through your technique of pulling, there is nothing else that you will be able to do to improve it. On the other hand, there are many other devices that do have the capabilities to increase the amount of vapor.

Besides that, the minimum you should pay for a VV/VW MOD is $50 to achieve maximum vapor. But if you want to spend a little more, you will experience a vaping session like no other.

Purchase the Best Atomizer Possible

We cannot stress enough of how important your atomizer has to be for the production of vapor. Therefore, most vapers stick to the sub-ohm atomizer tanks because of their coils being low resistance; so, they can tolerate the increased power that the coil requires. The use of sub-ohm tanks will be your best bet.

The type of atomizer that you want to stay away from is the clearomizer. This is because you won't receive the desired amount of vapor that you are looking for. What it all boils down to is the fact that having an atomizer that is higher than CE5 is ideal for blowing the most clouds.

Keep Your Wattage High

Keeping your wattage high will produce a higher amount of vapor. This is because if you have a higher amount of electricity flowing through the coil, you will have a higher amount of liquid that gets vaporized, causing a higher amount of vapor to be produced.

You must be careful though or you will easily destroy the coils. To prevent any damage to your coils, start out on a low setting and increase it gradually until you reach a comfortable setting.

The reasoning behind the use of wattage versus voltage is because wattage is more widely used. Wattage also considers the amount of coil resistance and makes proper adjustments. This is good to know because if your voltage is the same for two coils, the performance will be different if the resistance is also different, but your wattage will give the same performance though.

Airflow Is Key

It is guaranteed that the more airflow you have, the more vapor you will create. If you have very low airflow, but are still able to obtain a lot of vapor, then you are likely running hot with a high amount of concentrate. This could create a very unpleasant experience. If you simply increase the airflow, you will instantly get more vapor as well as cool vapor, too. More importantly, you want your vape to be cool if you intend to use a higher wattage.

The point is to create a balance and finding your comfort zone. To find the balance you might want, to begin with, a warmer vapor created with a completely open airflow may not be a good choice. This could cause your cloud to appear weak. It could also cause the flavor to be reduced tremendously, but if you are not in it for the taste, then keeping your airflow wide open won't matter to you.

If anything else, while vaping it is important that you at least have an adjustable airflow setting for your atomizer. Today, many of the atomizers available have these settings, so being able to create a lot of vapor will no longer be a problem.

Build the Best Dominant E-Cig Kit to Fit Your Tastes Without A Big Waste

Newbie vapers with serious desire to extract full benefit from e-cigarettes must have a basic grasp of various tasks required to build the best starter kit from scratch. Below is an overview of how to create a customized, high-quality e-cig kit that lasts a long while but won't break your budget. But before we get into that, realize that it is an investment at first, but in the long-run, it is well worth the money. To really put it into perspective, you will never realize such savings from $5.99 disposable e-cigs. For the best deal on a custom-built starter kit, heed the helpful hints below: 

Begin with The Battery - Variously called "chambers," batteries are the most vital components of e-cig kits. Shaped like long cylinders to resemble conventional cigarettes, e-cig battery designs represent a large range of sizes, colors and capacities. The single most important spec is battery life. Look for at least 280 mAh to get roughly 300 puffs from a full charge. Anything less is likely to yield more frustration from time wasted on frequent recharges than savoring your favorite nicotine taste sensation.

Chargers - A close second runner up to the battery is the e-cig charger. Most starter kits include a USB charger but some come with a plug-in wall or car adapter. Electrical wall outlets recharge much faster than USB or car chargers. Whichever charging device(s) you decide best will suit your lifestyle, verify that the cord that leads to the battery's bottom is long enough to let you vape while recharging.

Cartomizers vs. Cartridges - Most beginner kits include several disposable cartridges, each prefilled with 1 ml of e-liquid. A better pick is a starter kit with two refillable cartomizers and a complementary bottle of e-liquid. This affords a much wider variety of flavors that come in a higher quantity of controllable quality.

E-Liquid that sits inside a cartomizer is partially vaporized with every puff, thus gradually losing freshness and flavor. Thanks to transparent Pyrex tanks, remaining e-liquid level is visible. This gives you the ability to pour in just enough and let the unused portion "steep" in a refrigerated bottle to keep it fresh and strong each time you vape. Besides that, simple math will quickly reveal great savings gained from every refill.

We hope these tips help you on your joureny to building the best vape starter kit possible from Crystal Canyon Vapes.

Stop Buying E-Liquids Made in China!

The flavored e-liquids for e-cigarettes are no longer made just in China. They are now produced in the United States and other countries around the world. The e-liquids made in China have real problems and the potential for serious issues in the future. There are several reasons why you should stop buying e-liquids made in China.

No Monitoring or Regulation
One of the first reasons to stop is that the Chinese made e-liquids are not subject to the same monitoring and regulations as flavors made in other countries. Some manufacturers claim to have high standards. Others list ingredients on the side of the packaging. The reality is that there is no monitoring or tight regulation. These Chinese companies could be filling the e-liquids with chemicals that are harmful to humans. This should be reason enough to avoid Chinese e-liquids.

Poor Quality and Flavor
Another reason many people and e-cigarette retailers are already avoiding liquids made in China is quality. Many of the e-liquids coming out of China simply have a very bad taste. Some have a strong chemical aftertaste. Others just taste strange no matter what flavor is listed on the packaging. This makes vaping far less enjoyable. Part of this is likely because quality control is sometimes sacrificed in China in order to lower costs and improve production times.

Inconsistency
E-Liquids made in China suffer from consistency problems. Flavor liquids from one imported batch might have different properties than the next batch. This means you cannot rely on these e-liquids since the next one you buy might be completely different from what you were expecting. This is no way to vape. It is far better to simply rely on e-liquids that have not been imported from China.

Potential Damage to Electronic Cigarettes
You have no way of knowing what is contained in the e-liquids produced in China. The manufacturers could be using a range of ingredients or chemicals intended to lower costs without regard to how they react with atomizers and tanks. This means the wrong combination of chemicals could damage an e-cigarette or degrade performance. There is no reason to risk damaging a favorite e-cigarette with these liquids when so many other options are available.

Support the Local Economy
A final reason to stop buying e-liquids made in China is to support your local economy. Buying e-liquids from the country where you live will help to create jobs and keep those companies in business. Patronizing brands outside of China makes it possible for those companies to grow and offer a wider range of e-liquids in the future.

A Brief Overview of Variable and Standard Voltages

For those new or in the beginning stages of vaping, you might be asking yourself, “what’s the difference between variable and standard voltages?” The direct, real short answer: It is all in the vape! For instance, were you a heavy or frequent smoker? How much vape can you handle? Let those questions help guide you in your decision-making process when it comes to choosing the right vaping device.

Are you looking to control or want to adjust the amount of vapor you create, then the variable voltage is an option to consider. With that said, you need to know about the types of voltages, because if you adjust your device too high for instance, it will become too strong and can give your e-liquid burnt taste. To avoid this, the coil, when encountering this voltage, must stay wet and clean at all times, no exceptions. If you don't have a real idea for what you are doing, it may taste like burnt liquid. Variable voltages use a 6-volt battery. A variable voltage has 6 volts and with an average of 3-ohms, it can create 12 watts of vaping power. The best part is you can control it, and it is compatible with any cartomizer that has identical threading. Those that need more vapor, flavor, or a stronger throat hit, especially if you were once again former heavy smokers, you may prefer variable voltages. Most MODs out there today are the go-to-devices when it comes to these features.

Standard voltages have a quick recharge, are less expensive, and are simplistic to understand. With a standard voltage device, you produce less vapor. Most devices use 3.7 volt batteries and 2.5-ohm cartomizers, producing a little under 5.5 watts of vaping power. Again, standard voltages are simple to use, but the downside is you are unable to adjust the levels. For those new to the vaping world or prefer less vapor, then going standard may be the best option for you. The vaping devices, such as your basic e-cigarettes, areless expensive and easy to use. They make for awesome starter kits, and, youcan always upgrade if you do feel that it is not strong enough for your taste.

Your choice really depends on the amount of vapor you want to produce! Want more, go for variable voltage devices such as using most types of MODs. If want less, stick with the standard voltages such as using e-cigarettes. In the end, it’s all about your vaping preferences. For either option, check out our vaping hardware today.