Saturday, May 6, 2017

Tips for Increasing Vapor Production from Your MOD


Having an increased amount of vapor is the sure way to get the most out of your vaping experience. To achieve this, your battery must be able to put out the required power safely and the only way it can do that is by using sub-ohms. Batteries also can only provide a safe amount of current. This is referred to as the amp limit. So, make sure that you are aware that if you intend to utilize a MOD that requires its own battery, ensure that its battery's amp limit is continuous.

For those of you who have a more regulated and modern MOD that comes with a battery built-in, then you can enjoy all the vape you want without worrying. With that said, here are a few tips for increasing vapor production from your MOD.

Higher Power = Higher Vapor Amount

When using a basic device, the user must be aware that the only type of atomizer they can use is one with higher resistance that sends a fixed voltage. Although this will allow an increased amount of vapor through your technique of pulling, there is nothing else that you will be able to do to improve it. On the other hand, there are many other devices that do have the capabilities to increase the amount of vapor.

Besides that, the minimum you should pay for a VV/VW MOD is $50 to achieve maximum vapor. But if you want to spend a little more, you will experience a vaping session like no other.

Purchase the Best Atomizer Possible

We cannot stress enough of how important your atomizer has to be for the production of vapor. Therefore, most vapers stick to the sub-ohm atomizer tanks because of their coils being low resistance; so, they can tolerate the increased power that the coil requires. The use of sub-ohm tanks will be your best bet.

The type of atomizer that you want to stay away from is the clearomizer. This is because you won't receive the desired amount of vapor that you are looking for. What it all boils down to is the fact that having an atomizer that is higher than CE5 is ideal for blowing the most clouds.

Keep Your Wattage High

Keeping your wattage high will produce a higher amount of vapor. This is because if you have a higher amount of electricity flowing through the coil, you will have a higher amount of liquid that gets vaporized, causing a higher amount of vapor to be produced.

You must be careful though or you will easily destroy the coils. To prevent any damage to your coils, start out on a low setting and increase it gradually until you reach a comfortable setting.

The reasoning behind the use of wattage versus voltage is because wattage is more widely used. Wattage also considers the amount of coil resistance and makes proper adjustments. This is good to know because if your voltage is the same for two coils, the performance will be different if the resistance is also different, but your wattage will give the same performance though.

Airflow Is Key

It is guaranteed that the more airflow you have, the more vapor you will create. If you have very low airflow, but are still able to obtain a lot of vapor, then you are likely running hot with a high amount of concentrate. This could create a very unpleasant experience. If you simply increase the airflow, you will instantly get more vapor as well as cool vapor, too. More importantly, you want your vape to be cool if you intend to use a higher wattage.

The point is to create a balance and finding your comfort zone. To find the balance you might want, to begin with, a warmer vapor created with a completely open airflow may not be a good choice. This could cause your cloud to appear weak. It could also cause the flavor to be reduced tremendously, but if you are not in it for the taste, then keeping your airflow wide open won't matter to you.

If anything else, while vaping it is important that you at least have an adjustable airflow setting for your atomizer. Today, many of the atomizers available have these settings, so being able to create a lot of vapor will no longer be a problem.